Piping and Mechanical Inspector job at Q-Sourcing
Posted by: great-volunteer
Posted date: 2026-Aug-22
Location: Uganda, Kampala
Piping and Mechanical Inspector 2026-08-22T12:56:32+00:00 Q-Sourcing https://cdn.ugashare.com/jsjobsdata/data/employer/comp_7433/logo/Q-Sourcing.png https://www.qsourcing.com/ FULL_TIME Uganda Kampala 00256 Uganda Consulting Science & Engineering, Construction, Energy & Mining 2026-08-30T17:00:00+00:00 8 About This Job: Q-Sourcing Limited trading as Q-Sourcing Servtec is a manpower management solutions firm operating in the East African Region in the countries of Uganda, Kenya, Tanzania, Rwanda, and South Sudan. On behalf of our client SINOPEC, we are looking for a competent, skilled, and experienced Piping & Mechanical Inspector to work at site. The primary responsibilities of this position include: - Assist in compiling of company Quality Plan, Inspection, and Test Plan (ITP), and Quality Procedures and all pertained QA/QC documentation before the commencement of any fabrication/construction work.
- Witness and monitor site piping and mechanical activities, inspection, and test following the approved Quality Plan, ITP, Quality Procedures, etc.
- Follow the QA/QC management system at sites.
- Responsible for performing all aspects of piping and mechanical inspection activities with minimum supervision.
- Ensure Piping and Mechanical ITP stages are followed and complied with.
- Review IFC P&IDs, ISOs & and vessel drawings to ensure appropriate WPS are referenced with weld details and overall accuracy.
- Previous Syncrude Inspection experience is a must.
- Previous experience Tie In execution is a must.
Communication/Training - Monitor Piping and Mechanical operations and conduct required inspections work to resolve quality-related issues with workers, subcontractors, and the client.
- Communicate with management, staff, and clients the requirements of quality’s scope of work.
- Verify that all site activities comply with the quality codes and standards.
- Coordinate with the site team on all quality issues and distribute relevant QC/QA documentation to site sub-contractors.
- Provide appropriate feedback to management regarding QA/QC matters.
- Develop inspection and test programs.
- Coordinate quality site inspections with all site teams and vendors, coordinate all non destructive testing on site, and monitor the implementation of the approved site QC plan.
- Inspect/review product material, weld quality, and testing to ensure compliance with code, standards, specifications, and QCP.
- Ensure supplies and external services comply with Strike quality control standards.
- Identify and control all NCRs while correcting with remedial action.
- Review radiographic films.
- Witness all pressure testing; finalize testing documentation.
- Ensure all quality control documentation is compiled and completed in a timely matter meeting project deadlines.
- Prepare regulatory documentation as required and provide it to the client.
Qualifications/Experience required: - Bachelor’s degrees in mechanical engineering or Trained qualifications (CSWIP 3.1/AWS CWI).
- Minimum of 10 years’ experience in the Oil and Gas industry specifically large construction projects, with thorough knowledge of various safety regulations, standards, procedures
- Good knowledge of codes and standards related to the Instrumentation discipline.
- Recognized level of expertise in construction discipline with a good knowledge of TOTAL E&P general specifications/Contractors in oil and gas construction projects.
- The ideal candidate shall be fully conversant with applicable Oil and Gas Industry International Codes, Standards as well as best Industry Practices.
- A good awareness of other disciplines. Significant responsibility in multi-discipline teams or projects.
- Good interpersonal and organizational skills as well as a good level of computer literacy and proficient in Microsoft Office. English mandatory
- Assist in compiling of company Quality Plan, Inspection, and Test Plan (ITP), and Quality Procedures and all pertained QA/QC documentation before the commencement of any fabrication/construction work.
- Witness and monitor site piping and mechanical activities, inspection, and test following the approved Quality Plan, ITP, Quality Procedures, etc.
- Follow the QA/QC management system at sites.
- Responsible for performing all aspects of piping and mechanical inspection activities with minimum supervision.
- Ensure Piping and Mechanical ITP stages are followed and complied with.
- Review IFC P&IDs, ISOs & and vessel drawings to ensure appropriate WPS are referenced with weld details and overall accuracy.
- Monitor Piping and Mechanical operations and conduct required inspections work to resolve quality-related issues with workers, subcontractors, and the client.
- Communicate with management, staff, and clients the requirements of quality’s scope of work.
- Verify that all site activities comply with the quality codes and standards.
- Coordinate with the site team on all quality issues and distribute relevant QC/QA documentation to site sub-contractors.
- Provide appropriate feedback to management regarding QA/QC matters.
- Develop inspection and test programs.
- Coordinate quality site inspections with all site teams and vendors, coordinate all non destructive testing on site, and monitor the implementation of the approved site QC plan.
- Inspect/review product material, weld quality, and testing to ensure compliance with code, standards, specifications, and QCP.
- Ensure supplies and external services comply with Strike quality control standards.
- Identify and control all NCRs while correcting with remedial action.
- Review radiographic films.
- Witness all pressure testing; finalize testing documentation.
- Ensure all quality control documentation is compiled and completed in a timely matter meeting project deadlines.
- Prepare regulatory documentation as required and provide it to the client.
- Piping and Mechanical Inspection
- Quality Assurance/Quality Control (QA/QC)
- Inspection and Test Plans (ITP)
- Quality Procedures
- Review of P&IDs, ISOs, and vessel drawings
- Welding Procedures (WPS)
- Non-Destructive Testing (NDT) coordination
- Radiographic film review
- Pressure testing witness and documentation
- Non-Conformance Report (NCR) identification and control
- Communication
- Interpersonal skills
- Organizational skills
- Computer literacy
- Proficiency in Microsoft Office
- Bachelor’s degree in mechanical engineering or Trained qualifications (CSWIP 3.1/AWS CWI).
- Minimum of 10 years’ experience in the Oil and Gas industry, specifically large construction projects.
- Thorough knowledge of various safety regulations, standards, and procedures.
- Good knowledge of codes and standards related to the Instrumentation discipline.
- Recognized level of expertise in construction discipline.
- Good knowledge of TOTAL E&P general specifications/Contractors in oil and gas construction projects.
- Fully conversant with applicable Oil and Gas Industry International Codes, Standards, and best Industry Practices.
- Good awareness of other disciplines.
- Significant responsibility in multi-discipline teams or projects.
- Good interpersonal and organizational skills.
- Good level of computer literacy and proficient in Microsoft Office.
- English mandatory.
- Previous Syncrude Inspection experience is a must.
- Previous experience Tie In execution is a must.
JOB-6a899c8025f20 Vacancy title:
Piping and Mechanical Inspector Jobs at:
Q-Sourcing Deadline of this Job:
Sunday, August 30 2026 Duty Station:
Uganda | Kampala Summary
Date Posted: Saturday, August 22 2026, Base Salary: Not Disclosed JOB DETAILS:
About This Job: Q-Sourcing Limited trading as Q-Sourcing Servtec is a manpower management solutions firm operating in the East African Region in the countries of Uganda, Kenya, Tanzania, Rwanda, and South Sudan. On behalf of our client SINOPEC, we are looking for a competent, skilled, and experienced Piping & Mechanical Inspector to work at site. The primary responsibilities of this position include: - Assist in compiling of company Quality Plan, Inspection, and Test Plan (ITP), and Quality Procedures and all pertained QA/QC documentation before the commencement of any fabrication/construction work.
- Witness and monitor site piping and mechanical activities, inspection, and test following the approved Quality Plan, ITP, Quality Procedures, etc.
- Follow the QA/QC management system at sites.
- Responsible for performing all aspects of piping and mechanical inspection activities with minimum supervision.
- Ensure Piping and Mechanical ITP stages are followed and complied with.
- Review IFC P&IDs, ISOs & and vessel drawings to ensure appropriate WPS are referenced with weld details and overall accuracy.
- Previous Syncrude Inspection experience is a must.
- Previous experience Tie In execution is a must.
Communication/Training - Monitor Piping and Mechanical operations and conduct required inspections work to resolve quality-related issues with workers, subcontractors, and the client.
- Communicate with management, staff, and clients the requirements of quality’s scope of work.
- Verify that all site activities comply with the quality codes and standards.
- Coordinate with the site team on all quality issues and distribute relevant QC/QA documentation to site sub-contractors.
- Provide appropriate feedback to management regarding QA/QC matters.
- Develop inspection and test programs.
- Coordinate quality site inspections with all site teams and vendors, coordinate all non destructive testing on site, and monitor the implementation of the approved site QC plan.
- Inspect/review product material, weld quality, and testing to ensure compliance with code, standards, specifications, and QCP.
- Ensure supplies and external services comply with Strike quality control standards.
- Identify and control all NCRs while correcting with remedial action.
- Review radiographic films.
- Witness all pressure testing; finalize testing documentation.
- Ensure all quality control documentation is compiled and completed in a timely matter meeting project deadlines.
- Prepare regulatory documentation as required and provide it to the client.
Qualifications/Experience required: - Bachelor’s degrees in mechanical engineering or Trained qualifications (CSWIP 3.1/AWS CWI).
- Minimum of 10 years’ experience in the Oil and Gas industry specifically large construction projects, with thorough knowledge of various safety regulations, standards, procedures
- Good knowledge of codes and standards related to the Instrumentation discipline.
- Recognized level of expertise in construction discipline with a good knowledge of TOTAL E&P general specifications/Contractors in oil and gas construction projects.
- The ideal candidate shall be fully conversant with applicable Oil and Gas Industry International Codes, Standards as well as best Industry Practices.
- A good awareness of other disciplines. Significant responsibility in multi-discipline teams or projects.
- Good interpersonal and organizational skills as well as a good level of computer literacy and proficient in Microsoft Office. English mandatory
Work Hours: 8 Experience in Months: 120 Level of Education: bachelor degree Job application procedure
All candidates who meet the criteria outlined above are encouraged to apply under the job vacancy “QSSU-SINOPEC-PMI-PIPING & MECHANICAL INSPECTOR.†Application link: Click Here to Apply Now Only shortlisted applicants will be contacted.
|