Fluid, Cement & Waste Supervisor - FSV job at Aldelia

About this offer

Technical Assistance Services

Fluid, Cement & Waste Supervisor (FSV) RIG 1

CFT reference

CFT-TILENGA-TEPU-UPST-248

Frame contract reference

/

Number of submissions

3

Reporting line in organization

Fluids Superintendent (FSI)

Activities

• Supervise all operations related to Cementing Contractor and Drilling Fluids Contractor in the field of operations
• Contribute to the full implementation of TEPU goals and objectives.
• Perform quality assurance of mud and cement systems, stock inventory and consumption and Contractor reporting.
• Assist the Drilling Supervisor to maximize performance.
• Contribute to the optimization and cost reduction of operations while maintaining a high level of safety and preventing any pollution.
• Ensure that Contractor’s set commitment, goals, and objectives are fulfilled.
• Assist in the motivation and training of field personnel to meet TEPU desired standards.
• Optimize the management of Fluid and Cement Services in the field. Coordinate actions between the different parties involved to ensure that the best procedures are followed.
• Ensure that Company and Contractor HSE standards are respected by the individuals executing the Fluids & Cement contract.
• Ensure that Fluids & Cement programs and procedures are available, understood and agreed by personnel involved.
• Optimize the management of Fluid and Cement Services in the field. Coordinate actions between the different parties involved to ensure that the best practices and procedures are followed.
• Assist Drilling Supervisor in Safety meeting regarding mud, cement and waste management issues.
• Perform quality assurance (chemicals, equipment, lab, procedures).
• Assist specific critical operations on rig sites when required.
• Follow up all field operations.
• Control logistics and inventory management on wells pad.
• Review and report analyses of any equipment failure or non-conformance services.
• Ensure permanent quality of data reporting (Wellview and others).
• Review and report solids control equipment efficiency.
• Review contractor’s design for cementing operations and close supervision at the rig site.
• Presence during Morning call (Drilling report from Rig to Town).
• Advise the TotalEnergies Fluids / Cementing Engineer on treatment and direct offshore fluids supervisor for implementation.

Context and environment

A Green Field Project, the Tilenga field is to be found in a remote location in UGANDA near lake Albert with particularly sensitive environmental conditions. A challenging project; heavy and waxy oils produced from 31 drilling pads, (with some of them located in a national park) and treated in a Production Center of 200,000bopd oil capacity and 650,000 bld of water treatment capacity. Reservoir pressure maintenance is ensured either by water injection or by polymer water injection depending on the reservoir’s characteristics. The project also includes an

extended interconnecting network with temperature preservation. Multicultural environment: Contractors are anticipated to be in various parts of the world. Ugandan rules and regulations, administrative requirements and technical authorizations as well as international codes for onshore plant will apply.

Accountabilities

• Supervise all operations related to Cementing Contractor, Drilling Fluids Contractor, brine Contractors and Waste management Contractor in the field of operations.
• Contribute to the full implementation of HSE goals and objectives.
• Perform quality assurance of mud and cement systems, stock inventory and consumption and Contractor reporting.
• Assist the Drilling Supervisor to maximize performance.
• Contribute to the optimization and cost reduction of operations while maintaining a high level of safety and preventing any pollution.
• Ensure that Contractor's set commitment, goals, and objectives are fulfilled
• Assist in the motivation and training of field personnel to meet desired standards.
• Monitor and advise on cuttings waste management operations.

Qualifications/Experience required

Qualification

• MSc (or BSc or equivalent professional experience), Mud and Cementing School
• Good communication skills to improve fluids management and cementing operation on rig locations. Very good interpersonal skills and decision making,
• fluent in English.
• IWCF Level 4

Experience:

A minimum of 5 years of international and operational experience in fluids & cement (experience in waste management is preferred). International experience preferentially in land operations.

Experience of supervision for onsite drilling fluids operations, cementing operations, preparation, calculation and planning for casing cement operations and isolation cement plugs is desirable.

Duration & Location

Location

Buliisa, Uganda

Commencement date

Q2 2026

Duration

12+ months

Status

Rotational

Contract type

Fixed-term

Number of hours per week

Full time

• Supervise all operations related to Cementing Contractor and Drilling Fluids Contractor in the field of operations
• Contribute to the full implementation of TEPU goals and objectives.
• Perform quality assurance of mud and cement systems, stock inventory and consumption and Contractor reporting.
• Assist the Drilling Supervisor to maximize performance.
• Contribute to the optimization and cost reduction of operations while maintaining a high level of safety and preventing any pollution.
• Ensure that Contractor’s set commitment, goals, and objectives are fulfilled.
• Assist in the motivation and training of field personnel to meet TEPU desired standards.
• Optimize the management of Fluid and Cement Services in the field. Coordinate actions between the different parties involved to ensure that the best procedures are followed.
• Ensure that Company and Contractor HSE standards are respected by the individuals executing the Fluids & Cement contract.
• Ensure that Fluids & Cement programs and procedures are available, understood and agreed by personnel involved.
• Optimize the management of Fluid and Cement Services in the field. Coordinate actions between the different parties involved to ensure that the best practices and procedures are followed.
• Assist Drilling Supervisor in Safety meeting regarding mud, cement and waste management issues.
• Perform quality assurance (chemicals, equipment, lab, procedures).
• Assist specific critical operations on rig sites when required.
• Follow up all field operations.
• Control logistics and inventory management on wells pad.
• Review and report analyses of any equipment failure or non-conformance services.
• Ensure permanent quality of data reporting (Wellview and others).
• Review and report solids control equipment efficiency.
• Review contractor’s design for cementing operations and close supervision at the rig site.
• Presence during Morning call (Drilling report from Rig to Town).
• Advise the TotalEnergies Fluids / Cementing Engineer on treatment and direct offshore fluids supervisor for implementation.
• Supervise all operations related to Cementing Contractor, Drilling Fluids Contractor, brine Contractors and Waste management Contractor in the field of operations.
• Contribute to the full implementation of HSE goals and objectives.
• Perform quality assurance of mud and cement systems, stock inventory and consumption and Contractor reporting.
• Assist the Drilling Supervisor to maximize performance.
• Contribute to the optimization and cost reduction of operations while maintaining a high level of safety and preventing any pollution.
• Ensure that Contractor's set commitment, goals, and objectives are fulfilled
• Assist in the motivation and training of field personnel to meet desired standards.
• Monitor and advise on cuttings waste management operations.

• Good communication skills to improve fluids management and cementing operation on rig locations.
• Very good interpersonal skills and decision making,
• fluent in English.

• MSc (or BSc or equivalent professional experience), Mud and Cementing School
• IWCF Level 4